Using Voice Recognition; Canceling Voice Recognition - GMC EQUINOX - NAVIGATION SYSTEM 2010 Owner's Manual

88 Infotainment System

Using Voice Recognition

1. Press and release the
steering wheel control button.
The audio system mutes, and a
beep is heard. A voice prompt
stating, "Please start speaking
after the beep" might be heard.
If there is no beep, make
sure that the voice volume
setting is not turned down.
See Configure Menu on page 65
for more information.
While voice recognition is active,
the system displays
g
a symbol.
2. Clearly speak one of the
commands listed later in
this section.

Canceling Voice Recognition

g
1. Press and release
wheel control button to cancel
a command, or if the system
response does not match
the verbal command.
2. The system replies, "Voice
recognition canceled".
Pressing any other radio or
steering wheel control, other than
the volume knob or the volume
steering wheel control button
cancels the session.
3. Press and release the talk
symbol steering wheel control
button to restart the voice
recognition session.
Helpful Hints for Speaking
Commands
$
steering
•
When a multiple command is
available, choose the command
that best works for you.
•
Words that are in brackets are
optional. For example, the
command "Radio [band] FM",
saying "Radio FM" or "Radio
Band FM" are both valid
commands.
•
Words that are separated by a ( / )
mean there is a choice of using a
word on either side of the slash.
For example, the command
(CD/DVD/Disc) [help], you can
say "CD [help]" or "DVD [help]"
or "Disc [help]".
•
When the system recognizes the
command the system will either
perform the function or ask to
confirm the choice by clearly
saying "yes" or "no".