Removing the Back Cover and Wall Mount Assembly
1.
Remove the ten screws that fasten the back cover.
2.
Remove the back cover.
3.
Remove the five screws holding the wall mount assembly.
4.
Remove another five screws that secure the wall mount assembly.
5.
Remove four screw nuts holding the wall mount assembly as shown.
6.
Then remove the last screw that secure the wall mount assembly.
7.
Detach the wall mount assembly.
Removing the Power Board
1.
Disconnect the cables (audio to power board; on the right/main board to power board; on the left).
2.
Remove the three screws that fasten the power board.
3.
Remove another three screws holding power board.
46
Chapter 3