Using Special Features; Using The Base Ringers; Using The Audio Boost; Silent Mode - Uniden D3097 Series User Manual

USING SPECIAL FEATURES

Using the Base Ringers

Visual Ringer
The visual ringer blinks for the following conditions:
 New messages
 Incoming call - outside line
 Incoming call - page
 Incoming call - intercom or intercom hold
You can change the brightness of the base visual ringer. The ViSUAL RiNGER switch
is on the right-hand side of the base. Slide the switch to
doesn't affect the audio ringers.)
Audio Ringer
The AUDiO RiNGER key is also on the right-hand side of the base. Each time you
press the key, it will cycle the base ringer tones through 4 steps: High, Medium,
Low, and Off.

Using the Audio Boost

You can increase the earpiece volume for normal calls and intercom calls. During a
call, press BOOST . Press BOOST again to turn it off.

Silent Mode

 You can silence the ringers on the base and all handsets at the same time. It
doesn't affect the visual ringers.
 With the phone in standby, press and hold SiLENT on the base. The phone
automatically turns on the answering system and shows
display on each handset. (The answering system answers any incoming calls
without playing anything through the speaker.)
 You can also press and hold #/SiLENT on the handset. The
displays. You can choose to have silent mode always on or select a duration
from 1 - 9 hours.
 To cancel, press SiLENT or #/SiLENT again.
#
If you turn the answering system off while Silent mode is on, the phone
turns off Silent mode.

Using Caller Announce

With the Caller Announce feature, you can turn on Text To Speech so your phone
can announce names in different situations.
 You have to turn on Caller Announce separately for each handset (see p. 8).
, , or
HigH Low off
Silent Mode On
Silent Mode menu
English - 13
. (It
in the