Table of Contents
Advertisement
6.Command Specification
REPORT DENSITY SUPPORT
Capacity: If MEDIA bit of CDB is set to 0, this field shall indicates the approximate capacity of the longest supported
medium assuming recording in this density with one partition. If the Media bit of CDB is set to 0, set to 0m this field
should indicate the approximate capacity of the current medium assuming recording in this density with one partition.
If the approximate capacity of the current medium cannot be determined for the mounted medium, the longest
supported medium capacity shall be used. The data and block size assumes that compression is disabled. The
capacity also assumes that the media is in "good" condition, and that "normal" data and block size are used. This
value is in units of megabytes (10000000 bytes). The logical unit does not guarantee that this space is actually
available in all cases.
6-84
SONY AIT-3Ex drive SDX-800V series Ver.1.0
Advertisement
Table of Contents
