Super Io Configuration; Restore Ac Power Loss; Serial Port 1 Configuration - Biostar H67MH User Manual

TH67MU3/H67M U3/H67MH
UEFI BIOS M anual

Super IO Configuration

Advanced
Super IO Configuration
Super IO Chip

Restore AC Power Loss

> Serial Port 1 Configuration
> Parallel Port Configuration
> CIR Controller Configuration
Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc.
Restore AC Power Loss
T his setting specifies how your system should behave after a power fail or interrupts
occurs. Power Off: Leaving the system in power-o ff status aft er power recovers.
Power ON: Powering on the system immediately when power returns. Last State: 1.
Leaving the system in power-off i f the system shuts down at DC off status; 2.
Powering on the system immediately if the system shuts down at DC on status.
Options: Power O ff (Default) / Power On / Last State

Serial Port 1 Configuration

Advanced
Serial Port 1 Configuration
Serial Port
Device Settings
Change Settings
Version x.xx.xxxx. Copyright© 201x, American Megatrends, Inc.
BIOS SETUP UTILITY
Specify what state to go to
when power is re-applied
after a power failure.
[Power Off]
Enter
+/-
F1
F3
F4
ESC
BIOS SETUP UTILITY
Enable or Disable Serial Port
(COM)
[Enabled]
[Auto]
Enter
+/-
F1
F3
F4
ESC
15
Select Screen
Select Item
Select
Change Opt.
General Help
Optimized Defaults
Save & Reset
Exit
Select Screen
Select Item
Select
Change Opt.
General Help
Optimized Defaults
Save & Reset
Exit