Sony Ericsson T630 User Manual page 38

Note: If you subscribe to cost information, you must
enter your PIN2 to clear the cost or time counter.
Setting the call cost
You can use the Tariff function to specify the price
per call unit. If you do not specify a price per call
unit, the number of call units appears.
To enter the price per call unit
1. Scroll to Calls, Time and cost, Call costs, Set tariff.
2. Enter your PIN2,
Ok
3. Select Change, .
Ok
4. Enter the code for the currency you want,
(for example GBP for Pounds Sterling),
5. Enter the price per call unit,
To enter a decimal point, press
Credit limit for calls
You can enter a total amount of money
that can be used for making calls. When the
amount reaches zero, no more calls can be
made. Please note that the credit limit is only
an estimated value.
38 Calling
This is the Internet version of the user's guide. © Print only for private use.
.
.
Ok
.
Ok
.
To set a credit limit
1. Scroll to Calls, Time and cost, Call costs, Set credit.
2. Enter your PIN2, .
Ok
3. Select Change, .
Ok
4. Enter an amount, .
Ok
Diverting calls
If you cannot answer incoming voice, fax
or data calls, you can divert them to another
number, for example your answering
service.
For voice calls, you can choose between the
following divert alternatives:
• Divert always – divert all voice calls.
• When busy – divert calls if you are already on
the phone.
• Not reachable – divert calls if your phone is
turned off or if you are unreachable.
• No reply – divert calls that you do not answer
within a specified time limit (operator-
dependent).
Note: When the Restrict calls function is on, some
Divert calls options cannot be activated.