MSI 760GM User Manual page 94

■ Intalze logcal drve, zero the dsk drves. RAID 1 or 10 only.
■ Strpe Block Sze, the default 64KB s best for most applcatons. RAID 0 or 10
only.
■ Ggabyte Boundary, allows use of slghtly smaller replacement drves.
■ Cache Mode, WrteThru or WrteBack.
4. On the Drves Assgnments wndow, use the arrow key to choose the hard drves
whch you want to make part of the LD, use the space key to change the assgnment
to "Y". Then press [Ctrl+Y] to save the configuraton.
5. A message wll show up on the bottom, press any key to save the configuraton or
press [Ctrl-Y] to allocate the RAID capacty manually.
Important
The default capacty s the full capacty of the selected hard drves.
•
• If you allocate the first LD capacty manually, you can create second LD wth reman-
ng capacty of the selected hard drves.
MS-7596 MS-7596
B-5