Table of Contents
Advertisement
Full Screen Logo [Enabled]
When [Enabled], MyLogo is displayed instead of the POST messages. Setting to
[Disabled] displays the normal POST messages. Configuration options: [Disabled]
[Enabled]
Make sure that the Full Screen Logo item is set to [Enabled] if you
want to use the ASUS MyLogo2 feature.
AddOn ROM Display Mode [Force BIOS]
Sets the display mode for the option ROM.
Configuration options: [Force BIOS] [Keep Current]
Bootup Num-Lock [On]
Selects the power-on state for the NumLock key.
Configuration options: [On] [Off]
Wait for 'F1' If Error [Enabled]
Sets whether to wait for F1 key to be pressed if an error occurs.
Configuration options: [Enabled [Disabled]]
Hit 'Del' Message Display [Enabled]
Toggles the display of "Press DEL to run Setup".
Configuration options: [Enabled] [Disabled]
Interrupt 19 Capture [Disabled]
When [Enabled], it allows option ROMs to trap interrupt 19. This is required by
some PCI cards that provide a ROM based setup utility.
Configuration options: [Disabled] [Enabled]
2-22
Chapter 2: BIOS information
Advertisement
Table of Contents
