Asus a7n8x User Manual page 55

MB, CPU Temperature [xx C / xx F]
The onboard hardware monitor automatically detects the MB (motherboard) and
CPU temperatures.
VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage
The onboard hardware monitor automatically detects the voltage output through the
voltage regulators.
CPU Fan Speed xxxx RPM or 0 RPM
CHASSIS Fan Speed xxxx RPM or 0 RPM
POWER Fan Speed xxxx RPM or 0 RPM
The onboard hardware monitor automatically detects the CPU, power and chassis
fan speeds and displays the fan speeds in revolutions per minute (RPM). If any of
the fans is not connected to the fan connectors on the motherboard, the specific
field will show N/A.
Q-Fan Control [Disabled]
This field allows you to enable or disable the ASUS Q-Fan feature that smartly
adjusts the fan speeds for more efficient system operation. When this field is set to
Fan Speed Ratio Speed Up/Down
[Enabled], set the appropriate and
Response Time.
Configuration options: [Disabled] [Enabled]
Fan Speed Ratio [10/15]
This item allows you to select the appropriate fan speed ratio for the system. The
default [10/15] is the minimum fan speed ratio. Select a higher ratio if you installed
additional devices and the system requires more ventilation. This item is required
to be set when the Q-Fan Control field is [Enabled]. Configuration options: [10/15]
[11/15] [12/15] [13/15] [14/15] [Full Speed].
Speed Up/Down Response Time [4 Sec/8 Sec]
This item indicates the time period before the fan speeds adjust to the vale set in
Fan Speed Ratio
the field. This item is required to be set when the Q-Fan
Control field is [Enabled]. Configuration options: [1 Sec/2 Sec] [2 Sec/4 Sec] [3
Sec/6 Sec] [4 Sec/8 Sec]
2-25
ASUS A7N8X Motherboard