Configure A Modem Connection-Csd - Nokia 1261 - Cell Phone - AMPS User Manual

3 Verify that the GPRS access number is displayed correctly, then tap Connect.
When you have successfully logged on to the network, the Pocket PC status screen will show the message Device Connected.
4 Launch your browser or e-mail application.
Before you make a digital data call
Before initiating the data call from your Pocket PC device, make sure you establish a connection between your phone and handheld
device.
See "Understand requirements for digital data calls" on page 1.

• CONFIGURE A MODEM CONNECTION-CSD

The procedure for creating a new modem connection for use with your Nokia phone is similar to that found in the various Windows
desktop operating systems. However, before you can configure your Pocket PC for a CSD data call, you need to obtain the required
setup information from your ISP or corporate network Helpdesk.
Important: You may need to first disable the Pocket PC option that automatically begins synchronization when an IR
connection is detected. For more information on this task, consult the user guide for your handheld device.
CREATING A MODEM CONNECTION
To create a new Pocket PC modem connection for your Internet service provider or corporate network:
1 Tap the Start icon , then tap Settings.
2 Tap the Connections tab, then tap Modem.
3 Tap New Connection, then enter a name for the connection (for example, Internet-Nokia phone).
4 Click the modem selection drop-down arrow, then select the IrCOMM or Generic IrDA option (for IR).
5 Tap Advanced to access additional configuration properties for Port Settings, TCP/IP, and Name Servers (if required by your
corporate network or ISP).
6 Tap OK to close the Advanced properties window, then tap Next.
[ 46 ]
Pocket PC device configuration
14