Sharp GX30 User Manual page 180

6.
Enter the country code, then press
7.
Enter the network code, then press
8.
Enter a new network name and press
Editing the Preferred List
To Change the Position of a Network in the
Preferred List
1.
Perform steps 1 to 3 in "Opening the Network
Settings Screen" on page 178.
Press a or b to highlight "Select Network", then
2.
press to select.
Press a or b to highlight "Set Preferred", then
3.
press to select.
Press a or b to highlight the name of the network
4.
to change the position from the list, then press
to select.
Press a or b to highlight "Insert" or "Add to end",
5.
then press to select.
To Delete a Network from the Preferred List
1.
Perform steps 1 to 3 in "Opening the Network
Settings Screen" on page 178.
Press a or b to highlight "Select Network", then
2.
press to select.
Press a or b to highlight "Set Preferred", then
3.
.
press
.
Press a or b to highlight the name of the network
4.
.
to delete, then press
Press a or b to highlight "Delete", then press
5.
to select.
Changing the Network Password
1.
Perform steps 1 to 3 in "Opening the Network
Settings Screen" on page 178.
Press a or b to highlight "Change Password",
2.
then press
3.
Enter the old password, then press
4.
Enter a new password, then press
5.
Enter a new password again, then press
If you enter the incorrect password in step 5, the
screen will return to step 2 and you are asked to
enter the password again.
6.
Press
to select.
to select.
to select.
.
(M 9-7-2)
.
.
.
Settings 179