Memory Status; Speed Dial List; Sending A Contacts List Entry - Sharp GX17 User Manual

Memory Status

This function helps you to check the memory used in
the Contacts List.
→
"Contacts" "Contacts List"
→
"Advanced" "Memory Status"

Speed Dial List

You can set a maximum of 8 phone numbers in the
Speed Dial List (p. 87).
Setting Contacts List Entries in the Speed Dial
List
→
"Contacts" "Contacts List"
1.
Select the desired entry.
2.
Highlight the desired phone number.
3.
Press [Options] and select "Add to Speed Dial".
4.
Select the desired list number.
Tip
• The nine digit keys correspond to list numbers.
• To view the speed dial list, see page 87.
→ →
[Options]

Sending a Contacts List Entry

→
"Contacts" "Contacts List"
1.
Highlight the desired entry.
2.
Press [Options] and select "Send Contact".
3.
Select "Via Bluetooth" or "Via Infrared".
For "Via Bluetooth"
The phone starts searching for Bluetooth wireless
technology enabled devices within 10 metres.
When detected, a list of enabled devices is displayed
allowing you to select the desired device. The
connection can be established and the entry sent.
For "Via Infrared"
The phone starts searching for an infrared-enabled
device within 20 centimetres.
When detected, the infrared connection is established
and the entry is sent.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless
technology enabled device for the first time.
Contacts List 35