Advertisement
Operating Your Breville Power Blender
Before first use
Remove and safely discard any packaging material and
promotional labels.
Disassemble the blender jug by following Steps 3 to 5
in 'Disassembling the blender' and wash the lid, inner
measuring cup, blender jug, silicon seal, blender jug base
and blade assembly in warm, soapy water with a soft
cloth. Rinse and dry thoroughly.
Wipe the motor base with a damp cloth and dry
thoroughly.
NOTE
The blending blades are extremely sharp. Avoid any
contact with fingers and hands.
Disassembling the blender
1.
Place the motor base on a flat, dry surface such as a
bench top. Ensure that the speed selection dial is in
the OFF position, the appliance is switched off at the
power outlet and the power cord is unplugged.
2.
Remove the blender jug from the motor base by
holding the motor base firmly and grasping the
blender jug handle and pulling the blender jug up
and off the motor base.
3.
Remove the lid and inner measuring cup from the
blender jug.
4.
Place the blender jug upside down on a flat, dry
surface such as a bench top.
5.
Hold the jug handle and turn the blender jug base
anti-clockwise to remove. Carefully lift the blade
assembly out of the narrow end of the blender jug.
Remove the silicon seal from outside the narrow end
of the blender jug.
Assembling and attaching the
blender jug
1.
Place the motor base on a flat, dry surface such as
a bench top. Ensure the speed selection dial is in
the OFF position, the appliance is switched off at the
power outlet and the power cord is unplugged.
CBL6_IB_FA.indd 7
2.
Place the blender jug upside down on a flat, dry
surface such as a bench top.
3.
Hold the jug handle and place the silicon seal onto
the narrow end of the blender jug then carefully
insert the blade assembly.
4.
Place the blender jug base over the blade assembly
and turn clockwise to secure into position.
5.
Turn the assembled blender jug upright and place
onto the motor base.
6.
Insert the inner measuring cup into the lid then insert
the lid firmly into the top of the blender jug.
NOTE
Ensure lid is placed onto the blender jug firmly
and the inner measuring cup is in position before
operating the blender. Do not operate the blender
without the lid on. Additional ingredients can be
added whilst blending by removing the inner
measuring cup and placing or pouring ingredients
through the opening in the lid.
NOTE
Liquids should be placed into the blender jug
before solid ingredients, unless specified
differently in a recipe.
Using the blender
NOTE
When using the blender for the first time, you may
notice an odour coming from the motor. This is
normal and will dissipate with use.
NOTE
All foods should be cut into cubes (approx. 2-3cm
square) to achieve an even result.
1.
Ensure the speed selection dial is in the OFF position.
Insert the power plug into a 230/240V power outlet
and switch on at the power outlet.
2.
Remove the lid and add food and/or liquid into the
blender jug.
3.
Insert the inner measuring cup into the lid then insert
the lid firmly into the top of the blender jug.
7
9/4/09 2:07:15 PM
Hide quick links:
Advertisement
