Lan; Wireless Activity Led - Toshiba Satellite U505-S2960 User Manual

Wireless activity LED

The wireless activity LED indicates the status of the wireless
communication functions.
Indicator status
LED off
LED glows
If you used the Task Bar to disable Wireless LAN, you will need to restart
the computer to re-enable it. Alternatively, you can also follow this
procedure:
1. In the Control Panel, click System and Maintenance.
2. Click the Device Manager. The Device Manager window opens. Click
Network adaptors.
3. Select your preferred Network adaptor, then click the Enable button in
the tool bar.

LAN

The computer has built-in support for Fast Ethernet LAN (10 megabits per
second, 10BASE-T), Fast Ethernet LAN (100 megabits per second,
100BASE-TX) and Gigabit Ethernet LAN (1000 megabits per second,
1000BASE-T).
This section describes how to connect disconnect to a LAN.
Do not install or remove a memory module while Wake-up on LAN is
enabled.
The Wake-up on LAN function consumes power even when the system
is off. Leave the AC adaptor connected while using this feature.
The Link speed (10/100/1000 megabits per second) changes
automatically depending on the network conditions (connected device,
cable or nose and so on).
User's Manual
Satellite U500/U500D, Satellite Pro U500/U500D
Indication
Wireless communication switch is set to
off.Automatic power down because of
overheating. Power malfunction.
Wireless communication switch is on. Wireless
LAN is turned on by an application.
4-29