Advertisement
Table of Contents
- 1 What’s in the Box?
- 2 Controls
- 3 Aiming the Home Antenna
- 4 Before You Begin
- 5 Getting Set up
- 6 Install the Battery
- 7 Set up
- 8 Connect to Stereo
- 9 Activate and Explore
- 10 2Go: Store and Play Back with a Single Button
- 11 To Store
- 12 To Play Back
- 13 Advanced Features & Additional Info
- Download this manual
See also:
User Manual
Satellite Radio Receiver · Quick Guide
Model SA10113
Warning: This manual contains important safety and operating information.
Please read, understand, and follow the instructions in this manual. Failure to do
so could result in personal injury, death, and/or damage to your MyFi receiver,
accessories, and/or to your vehicle or other property.
Advertisement
Table of Contents
Related Manuals for Delphi XM2go MyFi SA10113
Summary of Contents for Delphi XM2go MyFi SA10113
- Page 1 Satellite Radio Receiver · Quick Guide Model SA10113 Warning: This manual contains important safety and operating information. Please read, understand, and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to your MyFi receiver,...
- Page 2 stuff... What’s in the box? remote control belt clip/stand wearable antenna with two clip options protective case home stand MyFi home antenna home power audio cable adaptor...
- Page 3 rechargeable headphones lithium ion battery vehicle antenna vehicle cradle cassette adaptor vehicle power adaptor receiver swivel mount (with extra adhesive pad) flush mount vent mount cleaning kit...
- Page 4 Controls Turn on your MyFi by pressing the power button. You should be able to hear channel 1, the XM Preview Channel, through your ear buds or attached stereo/speakers. 2go button – store up to five hours of XM programming mode button –...
- Page 5 Before you begin, take a moment to familiarize yourself with your MyFi’s controls. Most basic functions can be accessed using the front panel buttons and the dial. More advanced features are accessed using the “menu” button and the dial. power button – press and hold to turn your MyFi on and off dial –...
- Page 6 ready... Getting set up Install the battery Be sure to charge your battery for several hours on the home stand before use. Set up Assemble your MyFi and its home stand as shown. Connect to stereo Plug the AC adaptor into an outlet. Connect the home antenna and connect the line out to either your home stereo or powered (PC type) speakers.
- Page 7 The XM Radio ID does not use the letters I, O, S, and F. XM subscription required for reception of XM service. Not available in Alaska or Hawaii. Activate your XM Satellite Radio service by contacting XM at http://activate.xmradio.com or by calling 1.800.XM.RADIO (1.800.967.2346).
- Page 8 Charge the battery and store some music 2go: Store and play back with a single button Your MyFi lets you store up to five hours of programming and play it back at a later time. Listen to XM wherever you are, including on an airplane, subway, or anywhere satellite coverage may be limited.
- Page 10 Changes or modifications to the unit not expressly approved by Delphi can void your authority to operate this equipment. Important: The FCC and FAA have not certified the Delphi XM MyFi Satellite Radio Receiver for use in any aircraft (neither portable nor permanent installation). Therefore, Delphi cannot support this type of application or installation.