TP-Link TL-WN620G User Manual page 22

2. Edit the Security tab
Edit the fields in the Security tab of Profile Management to configure the profile. To define the
security mode, select the radio button of the desired security mode.
WPA/WPA2 - Wi-Fi Protected Access
WPA/WPA2 Passphrase - Wi-Fi Protected Access Passphrase
802.1x - Enables 802.1x security.
Shared Key (Static WEP) - Enables the use of shared keys that are defined on both the
access point and the station. To define shared encryption keys, choose the Shared Key radio
button and click the Configure button to fill in the Define Shared Keys window.
None: No security (not recommended).
Note:
If the access point that the wireless adapter is associating to has WEP set to optional and the
client has WEP enabled, make sure that Allow Association to Mixed Cells is checked on the
Security Tab to allow association. To complete WEP encryption configuration, you must select the
802.11 Authentication Mode as appropriate on the Advanced tab of this Profile Management
dialog.
TL-WN620G
Figure 3-4 General Tab of Profile Management
108M Wireless USB Adapter User Guide
15