Sanyo CE32LD81 Instruction Manual page 15

Display the Main Menu by pressing the "M" button.
Highlight the Timers line by pressing
and press the "SELECT" button to display the Timer
menu.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
Up to five separate timer events can be set and each
is displayed in the Timer screen, showing the event
number, the channel to be selected, the start time, end
time, date and the mode - whether that event is active
(and will be acted on) or not.
TIMER MENU
No Channel Name Start
1. ITV 1 20:00 21:00 12/05/2005
2. BBC ONE 00:00 00:00 01/01/2005
3. BBC ONE 00:00 00:00 01/01/2005
4. BBC ONE 00:00 00:00 01/01/2005
5. BBC ONE 00:00 00:00 01/01/2005
6. BBC ONE 00:00 00:00 01/01/2005
Toggle Mode MENU Exit
• To set an event, highlight its mode button using the
or button and press the "SELECT" button to
display the timer entry window.
Name:
Start:
End:
Date:
Mode:
• Here the five settings of channel name, start time,
end time, date and frequency mode can be set. You
can move freely between each setting using the
or buttons.
• The channel name is set using the
display the channel which broadcasts the programme.
• The start time, end time and date are each set with the
digit buttons on the remote control in 24-hour format.
or
End Date Mode
Active
Inactive
Inactive
Inactive
Inactive
Inactive
SELECT Edit Timer
3. ITV 1
00:00
00:00
03/06/2005
Once
or button to
• The frequency mode determines how often the
receiver operates this event and is set with the
button
button to be either Once, Daily, or Weekly.
If an invalid number for the start or end times or the
date is entered, "Entered time is not valid" message
appears on the menu.
If timer action occurs while the TV is watched, the TV
switches to the selected channel. When timer expires,
the TV switches to the channel which it is switched
from.
Selected digital channel will be output via Scart-2. You
should connect your VCR to Scart-2 for recording digital
broadcast.
Language
Some programmes are broadcast in two or more lan-
guages simultaneously. The language heard can be
selected from the Language Menu.
• Press the "M" button to display the Main Menu and use
or button to highlight the Language line and press
the "SELECT" button.
i
More
• Use the
language required and press the "SELECT" button. Nor-
mal viewing, with the required language soundtrack,
can be resumed by pressing the "M" button.
TV Setup
To be able to go through TV functions, you can use this
item.
The digital TV Setup menu screen is accessed from
the main menu. Press the "M" button to display the
main menu and use
Setup", press the "SELECT" button to display TV
Setup menu screen.
English - 14 -
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
or button to highlight the soundtrack
Languages
English
button to highlight "TV
or
or