Osd Setting Menus; Adjusting Picture Settings - HANNspree ST251MAB User Manual

3.1

OSD Setting Menus

Follow the instructions indicated on the down side of the OSD Function Menu. Press
P P on the control panel or
/
+
on the control panel or the
menu.
The following menus can be set by different adjustment methods.
3.2

Adjusting Picture Settings

1
Press MENU to enter the OSD Main Menu
screen. The Picture menu is then
displayed.
2
Press to enter the Picture menu.
3
Press / to select an item.
4
Press / to adjust the scales or
options settings.
5
Press MENU to return to the Picture menu.
6
Press MENU to exit the OSD menu.
- The Picture menu can be used to adjust the Picture Mode, Brightness, Contrast,
Sharpness, Colour, Hue, Backlight, and Colour Temp settings.
• The Picture Mode can be set to Standard, Vivid, Soft, or User.
• The Brightness, Contrast, Colour, and Hue (NTSC only) can be adjusted by
pressing /
• The Sharpness can be adjusted by pressing
• The Backlight helps to manually turn down the backlight in dark scenes,
generating a deeper black color. Press
• The Colour Temp can be set to Standard, Warm, or Cool.
Note: The options available on the OSD may vary depending on the input signal
source.
arrow keys to scroll through the menus, VOL
/
arrow key to select an item, or MENU to exit the OSD
to move the scales from 0-100.
Picture
Picture Mode
Brightness
Contrast
Sharpness
Colour
Hue
Backlight
Colour Temp
Move Select
/ to move the scales from 0-9.
/ to adjust the scales from 1-10.
Standard
50
50
5
50
50
2 5
Standard
Return
Menu
27