Installing The Stand Or Wall-Mount Bracket; Installing The Stand; Installing A Wall-Mount Bracket; Tv Components - Dynex DX-24L200A12 User Manual

4
DX-24L200A12
Installing the stand or
wall-mount bracket
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.

Installing the stand

To install the stand:
1
Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches.
2
Align the stand with the column, insert, then twist
until you hear it snap into place.

Installing a wall-mount bracket

Warning
This apparatus is intended to be supported by a UL
Listed wall mount bracket.
To attach your TV to a wall-mount bracket:
1
Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen from
damages and scratches.
2
Push the button marked PUSH, then rotate the
stand counterclockwise and remove it.
3
Remove the six screws that secure the stand column
to the TV, then remove the column.

Installing the stand or wall-mount bracket

4
Attach the wall-mount bracket to your TV using the
mounting holes on the back of your TV. See the
instructions that came with the wall-mount bracket
for information about how to correctly hang your TV.
Note
The length of the wall-mount screws vary depending
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.

TV components

Package contents

• Remote control and batteries (2 AAA)
• Stand with screws
• Composite cable
• Quick Setup Guide
7.87 in. (200 mm)
Wall mount bracket holes