Western Digital WD10000AH1U - Mac Edition User Manual page 126

To set up a workgroup name:
1. Click the Workgroup button on the Network tab home page.
2. Click Workgroup as the Mode option.
3. Enter a name for your workgroup in the Workgroup Name field.
4. Click the Submit button.
To join a domain (Windows 2003 Server only):
1. Click Domain Member.
2. Enter the domain name in the Domain Name field.
3. Enter the domain controller IP address in Domain Controller IP Address field.
4. Enter the domain administrator name in the Administrator field.
5. Enter the domain administrator password in the Administrator Password field.
Note: The local user and domain user share the same access control rights if the user name of the
local and domain users are the same (FTP service excluded).
6. Click the Submit button.
NETWORK STORAGE MANAGER: ADVANCED MODE - 120
MY BOOK WORLD EDITION
USER MANUAL