Completing Your Installation With Or Without A Bowl Light Fixture - Hunter 20179 Owner's Manual And Installation Manual

7 • Completing Your Installation With or Without a Bowl Light Fixture
Housing
Assembly Screw
42676-01 • 04/04/11 • Hunter Fan Company
Your Hunter fan comes with an integrated light fixture assembly and an
optional switch housing cap and plug button. This feature gives you the
option of installing the fan with OR without the included light fixture.
The steps below direct you whether or not you are installing a light
fixture.
WARNING: Use only the light fixture supplied with this fan model.
7-1. If you want to install the light fixture, proceed with step 7-2
now.
If you do not want to install the light fixture, you need to
uninstall it now. See "Uninstalling the Light Fixture" on page 14.
Once you have uninstalled the light fixture, continue with step
7-2.
7-2. To attach the lower switch housing, connect the upper plug
connectors from the motor to the lower plug connectors in the
lower switch housing assembly.
Note: Both plug connectors are polarized and will only fit together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
7-3. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with two #6-32 x 7/8" housing assembly screws.
If you are not installing the light fixture, your installation is
complete. Otherwise, proceed with step 7-4.
7-4. The last installation step when installing the light fixture is to
install the glass bowl. See "Installing the Glass Bowl" on page 13 for
instructions.
12