Seagate BlackArmor NAS 110 User Manual page 94

If you added a comment to the archive, it will be displayed in the Description column. If the
archive was protected with a password, Seagate BlackArmor Backup will ask for the
password in a dialog box. Neither the partitions layout will be shown, nor will the Next
button be enabled until you enter the correct password.
You can also select a letter to be assigned to the virtual disk from the Mount letter drop-
down list. If you do not want to mount the virtual drive, select Do not mount in the list.
4. If you select the Mount the partitions in the read-write mode box, the program
assumes that the mounted image will be modified and creates an incremental archive file to
capture the changes. It is strongly recommended that you list the forthcoming changes in
the Comments section to this file. For you to be able to make comments, the optional
Comments step appears in the wizard.
5. The program displays a summary containing a single operation. Click Proceed to connect
the selected partition image as a virtual disk.
94 Copyright (c) 2000-2009 Acronis. All rights reserved.
Copyright (c) 2009 Seagate Technology LLC. All Rights Reserved.