Table of Contents
Advertisement
Appendix
The picture stops (pauses) and
the navigation system cannot be
operated.
The picture is stretched, with in-
correct aspect ratio.
A parental lock message is dis-
played and DVD playback is not
possible.
Parental lock for DVD playback
cannot be canceled.
Playback is not with the audio
language and subtitle language
settings selected in [DVD/
DivX® Setup].
The picture is extremely unclear/
distorted and dark during play-
back.
iPod cannot be operated.
Problems with the phone screen
Symptom
Dialing is not possible because
the touch panel keys for dialing
are inactive.
If the screen becomes frozen...
Park your vehicle in a safe place, and turn off
the engine. Turn the ignition key back to "Acc
off". Then start the engine again, and turn the
power to the navigation system back on.
The reading of data is impossible
during disc playback.
The aspect setting is incorrect for
the display.
Parental lock is on.
The code number is incorrect.
The DVD playing does not feature
dialog or subtitles in the language
selected in [DVD/DivX® Setup].
The disc features a signal to prohibit
copying. (Some discs may have
this.)
The iPod is frozen.
An error has occurred.
Cause
Your phone is out of range for ser-
vice.
The connection between the cellular
phone and the navigation system
cannot be established now.
After touching g once, start playback once
more.
Select the appropriate setting for that image.
(Page 161, Page 128)
Turn parental lock off or change the level.
(Page 129)
Input the correct code number. (Page 129)
Switching to a selected language is not possi-
ble if the language selected in [DVD/DivX®
Setup] is not recorded on the disc. (Page 128)
Since the navigation system is compatible
with the copy guard analogue copy protect
system, the picture may suffer from horizon-
tal stripes or other imperfections when a disc
with that kind of protection signal is viewed
on some displays. This does not mean the na-
vigation system is malfunctioning.
! Reconnect the iPod with the USB interface
cable for iPod.
! Update the iPod software version.
! Reconnect the iPod with the USB interface
cable for iPod.
! Park your vehicle in a safe place, and turn
off the engine. Turn the ignition key back to
"Acc off". Then start the engine again, and
turn the power to the navigation system back
on.
! Update the iPod software version.
Action (Reference)
Retry after re-entering the range for service.
Perform the connection process.
Appendix
181
En
Advertisement
Table of Contents
