Advertisement
MC2 Add-on Commander Pairing Procedure
1.
Power on existing MC20 system
2.
Connect power and ground wires of MC2 add-on commander (see Installation)
3.
MC2 add-on commander display will turn on and automatically go to the pairing
screen in the program menu with ADD MC2 showing on the display
4.
On marine radio, select FM Tuner as source (make sure that tuner seek mode is OX
or LOCAL, not MANUAL)
5.
Found Radio will appear on the display below ADD MC2 when add-on commander is
ready to pair with MC20 system *
6.
On marine radio, press SEEK UP (
~
) once
7.
PRESS ENTER will appear below ADD MC2 on the dispray
8.
Press ENT to finish pairing operation and save new settings
9.
Press ESC to exit Program Menu
10. Turn off the existing MC20 system, then turn it back on. Pairing procedure is now
completed.
*If Found Radio does not appear on the display, MC2 location may be out of MC20 system
range (typical - 40 feet/12 m)
6
Advertisement
