Final Steps; Using The Re-Imaging Utility To Clone The Disk Images - Dell OptiPlex VDI Blaster Edition Manual

Final Steps

1 Once the re-imaging stage has completed, press <Enter> to reboot.
Do not remove the USB flash drive or CD/DVD drive yet.
2
Once you receive the message Please remove the disc and close
the tray (if any) and press Enter to continue you can safely remove
your USB flash key or CD/DVD from the thin client.
3
Your thin client now boots with the new operating system.
Using the Re-Imaging Utility to Clone the
Disk Images
You can clone any disk image that is currently being used on your thin client
and place the clone into a server for preservation or for sharing.
To clone from the OptiPlex 130 and OptiPlex 170:
1
Follow the previous steps to open the boot menu and access the
Re-Imaging Utility. When the boot menu appears, select the named
hard disk or flash drive containing the Re-Imaging Utility and press
<Enter>.
2
Once the boot up is complete the Devon IT Re-Imaging Utility Dell
Edition Main Menu is displayed.
Dell OptiPlex FX130 and FX170 Re-Imaging Guide | 12