50
Ad d i n g Pa r ts
Replace the computer cover (see page 71).
7
NOTICE:
To connect a network cable, first plug the cable in to the network
jack and then plug it in to the computer.
Plug your computer and devices into their electrical outlets, and turn
8
them on.
Adding a Second Hard Drive
CAUTION:
Before you begin any of the procedures in this section,
follow the safety instructions on page 7.
Your computer includes one hard drive. To add a second hard drive, perform
the following steps.
NOTICE:
To disconnect a network cable, first unplug the cable from your
computer and then unplug it from the network jack.
Turn off the computer and devices, and disconnect them from their
1
electrical outlets.
Briefly press the power button.
2
Pressing the power button when the computer is not connected to an
electrical outlet discharges residual electricity and can help prevent
system board damage.
Remove the computer cover (see page 42).
3