Removal and Replacement Procedures— Microtower (MT) Chassis
6.4 Front Drive Bezels
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
6.4.1 5.25" Drive Bezel Blank
Press one pair of the retaining tabs on the inside of the large bezel towards the outside of the
bezel to release the bezel blank. At the same time, pull the bezel blank inwards to remove it from
the main bezel.
To install a bezel blank, reverse the removal procedure.
6–4
(Section 6.1, "Preparation for
(Section 6.3, "Front
Bezel").
(Section 6.3, "Front
Bezel").
404569-001
Disassembly").
Service Reference Guide, dx2100 MT