Compaq dc5850 - Microtower PC Hardware Reference Manual page 43

Hardware reference guide - dc5850 microtower models

Hide thumbs Also See for dc5850 - Microtower PC:

Table of Contents

Place the new hard drive in the carrier then slide the hard drive back so that it seats in the SATA

connector on the carrier's circuit board. Be sure the connector on the hard drive is pressed all the

way into the connector on the carrier's circuit board.

Figure 2-35

Replace the four screws in the bottom of the carrier to hold the drive securely in place.

Figure 2-36

ENWW

Replacing the Hard Drive

Replacing the Security Screws

Installing Additional Drives

Table of Contents

5850 - deskjet color inkjet printer