Advertisement
Note:
Pressing
STOP button is for "function change" between DVD/CD/CD-ROM, USB and/or SD Card mode.
• To stop, press STOP button. Pressing
button can resume in previous playback position. If STOP
button is pressed three times, the unit trys to find the content of disc ("LOADING..." is shown), to find
the content of USB ("READ USB" is shown) and to find the content of SD ("READ CARD" is shown).
• To change media (e.g. change DVD/CD/CD-ROM to USB), press
STOP three times for function
change.
• If only DVD/CD/CD-ROM exists, "NO USB/NO CARD" is shown as indication.
• Please make sure your USB flash drive or SD card is FAT file system instead of NTFS file system. The
DVD unit does not support NTFS file system.
Playing a Disc (Basic Playback)
This owner's manual explains the basic instructions for operating this unit. Some DVDs are produced in
a manner that allows specific or limited operation during playback. Therefore, this unit may not respond
to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the
specific DVD in question for more information about the options available on that DVD.
"
" may appear on the screen during operation. A "
" means the desired operation is not
permitted by the unit or disc.
Playing a Disc
1. Slide the CHARGE / STANDBY / ON switch on the left side of the unit to the ON position.
See Customizing the function settings before proceeding to step 2.
2. Press the OPEN knob to open the disc door.
3. Hold the disc by its sides and carefully place it onto the spindle with the label side facing up, pushing
gently until you hear a "click".
4. Close the disc door. It takes a short while for your unit to load the disc. After loading, the unit will
automatically bring you to the main menu of the DVD or start playing the DVD.
5. If the unit does not automatically start playing the DVD, press the
PLAY button on the remote
control or
button on the unit.
Pausing Playback (Still Mode)
Press the PAUSE button. To resume normal playback, press the
PLAY button on the remote control or
button on the unit.
For a DVD, each time you press the
PAUSE button on the remote control, the picture advances one
frame.
Stopping Playback
Press the
STOP button at the location where you want to interrupt playback. To resume playback at the
position where the disc was stopped, press the
PLAY button on the remote control or
button on the
unit.
If you press the
STOP button twice, the unit's memory will be cleared and pressing the
PLAY button
on the remote control or
button on the unit will reset the DVD to the beginning.
Stopping Playback in DVD/CD/DIVX
• During playback, press the STOP button at the loaction where you want to interrupt playback. Press
the
PLAY button to resume playback at the position where the disc was stopped.
• Press the STOP button twice to clear the unit's memory. Pressing the
PLAY button will play the
disc from the beginning.
• Pressing the STOP button three times will change to next mode.
Stopping Playback in Picture Files
• During playback, press the STOP button will change back to File list.
• During playback, press the STOP button twice will change to next mode.
Fast Forward / Fast Reverse
1. Press the SEARCH
or
SEARCH button when a disc is playing. Each time you press the
SEARCH
or
SEARCH button, the playback speed changes in the following sequence:
x2
x4
x8
x20
x2
x4
x8
x20
PLAY button on the remote control or press the
2. Press the
button on the unit when you reach
the desired point to resume normal playback.
Note:
• The DVD player mutes sound and subtitles during reverse and forward scan of DVDs.
• The fast playback speed may differ depending on the disc.
Skip (Forward / Reverse)
• Press the
NEXT button to advance titles, chapters/tracks.
• Press the
PREV button to go back to current or previous titles, chapters/tracks.
• For an Audio CD, use the number buttons on the remote control to go directly to the desired track
number.
Audio Selection
On some DVDs, the sound is recorded in two or more formats. Follow the directions below to select the
preferred language and sound system.
1. While a disc is playing, press the AUDIO button to show the current
[ 1 ENGLISH
D5.1CH ]
audio format number.
2. Press the AUDIO button repeatedly to select the desired audio format.
Note:
• If only one audio format is recorded on the DVD, the number does not change.
• Some DVDs allow you to change audio selections using the disc menu only. If this is the case, press
the MENU button and choose the appropriate language on the disc menu.
• You can select different audio channels (Left, Right, Mono or Stereo) on an Audio CD by pressing the
AUDIO button repeatedly.
Subtitle Selection
1. While a DVD is playing, press the SUBTITLE button to display the
[ 1 ENGLISH ]
current language setting, as shown in the example.
2. Press the SUBTITLE button repeatedly to select the desired subtitle language. you can turn subtitles
off by pressing the SUBTITLE button repeatedly until the " Off " is displayed.
Note:
• Some DVDs are set to display subtitles automatically, and you cannot turn them off even if you set
the subtitle function to off.
• During some scenes, the subtitles may not appear immediately after you select your desired scene.
• The number of subtitle languages recorded differs depending on the disc. If only one language is
recorded, the language does not change.
• This function can only be used for discs on which subtitles have been recorded in multiple languages.
• Some DVDs allow you to change subtitles using the disc menu only. If this is the case, press the
MENU button and choose the appropriate subtitle on the disc menu.
E - 6
Angle Selection
Some DVDs contain scenes that have been shot from a number of
different angles. For these discs, the same scene can be viewed from
each of these different angles.
1. While you are playing a DVD with different angles recorded, press
the ANGLE button to view the number of current angles available.
2. Press the ANGLE button repeatedly to change the scene to the
next recorded angle.
• After approx. two seconds, playback will continue from the new angle selected.
• If no button is pressed within 10 seconds, playback continues without changing the current angle.
Note:
This function can only be used for discs on which scenes shot from multiple angles have been recorded.
Display Function
While the disc is playing, press the DISPLAY button
repeatedly to display information on operation status.
Elapsed Time:
Elapsed time from the beginning of the chapter/title
which is currently playing.
Remaining Time:
Remaining time of the chapter/title which is currently
playing.
Adjust the LCD Screen
you can adjust Brightness, Contrast and Aspect Ratio of the LCD screen.
1. Press the VIDEO MODE button.
2. Press the /
button to select Brightness, Contrast or Aspect Ratio. Select Default to set the LCD
screen to factory default setting.
3. Press the / button to change the setting.
4. Press the VIDEO MODE button to exit the menu.
Repeat Playback
you can play a specific DVD title or chapter repeatedly (title repeat, chapter repeat, A-B repeat).
Repeating a Chapter
1. While the DVD is playing, press the REPEAT DISC button until the " Repeat Chapter " indicator
displays on the screen. The current chapter is played repeatedly.
Repeating a Title
2. While the DVD is playing, press the REPEAT DISC button until the " Repeat Title " indicator displays
on the screen. The current title is played repeatedly.
To Resume Normal Playback
3. While the DVD is playing, press the REPEAT DISC button until the " Repeat Off " indicator displays
on the screen.
You can play a single CD track or the whole disc repeatedly.
Repeating a Single Track
1. While the CD is playing, press the REPEAT DISC button until the " Repeat single " indicator displays
on the screen. The current track is played repeatedly.
Repeating the Whole Disc
2. While the CD is playing, press the REPEAT DISC button until the " Repeat all " indicator displays on
the screen. The whole disc is played repeatedly.
To Resume Normal Playback
3. While the CD is playing, press the REPEAT DISC button until the " Off " indicator displays on the
screen.
Repeating a Specific Section
you can play a specific section repeatedly.
1. While the disc is playing, press the REPEAT A-B button at the beginning of the section (" Repeat A-
" is displayed) you want to play repeatedly.
2. Press the REPEAT A-B button again at the end of the section (" Repeat A-B " is displayed).
3. The unit will immediately begin replaying your selection.
To Resume Normal Playback
4. While the disc is playing, press the REPEAT A-B button until the " Repeat A-B Off " indicator displays
on the screen (the repeat indicator disappears from the screen for a CD). The system will return to
normal playback.
Note:
• Some discs may not permit A-B repeat operation.
• You cannot set the A-B repeat function for a segment that includes multiple camera angles.
• You can specify a segment only within the current title or track.
• There may be a slight difference between point A and the location where playback actually resumes
depending on the disc.
Locating a Desired Section
Locating a Specific Chapter / Title
If you know the chapter/title number for the chapter/title that you want to play, you can locate it by
directly selecting that number.
1. Press the GOTO button.
2. Press the / button to highlight chapter/title number, then press the corresponding number buttons
for the chapter/title you want (for example: 02, 08, 10 or 15). Press the ENTER button to confirm.
3. Playback starts from the selected chapter/title.
Note:
• If the chapter/title number entered is not permitted. Repeat steps 1 and 2 to re-enter the correct
number.
• Some discs may not respond to this process.
• This method of locating a chapter/title is available only on a DVD that contains chapter/title
numbers.
E - 7
Locating a Specific Time
you can move to a specific location by entering its corresponding time (hours, minutes, seconds).
1. Press the GOTO button.
2. Press the corresponding number buttons (5 digits: X:XX:XX, for example: 0 30 05, 1 08 23, 1 22 56) for
the setting point you want.
3. Playback starts from the selected section.
Note:
• If the time entered is not permitted by the DVD, "
" will display. You should re-enter the correct
time.
• Some discs may not respond to this process.
• Some scenes may not be located as precisely as you specified.
• This method for accessing specific locations is available only within the current title of the DVD.
Programmable Memory
You can combine your favorite titles/chapters/tracks and play
e.g. DVD
them in the order you determine.
1. Press the MEMORY button and a program screen appears.
2. Select the items in the order you want by pressing the
number buttons. Each time you press the Cursor buttons
( , , , ), the space is highlighted. Highlight where you
want to enter, then press the corresponding number
buttons.
3. Press the Cursor buttons ( ,
,
,
) to move the
highlighted bar to
, then press the
PLAY or ENTER
button. The DVD player starts memory playback.
4. To resume normal playback from memory playback
a) Press the MEMORY button.
e.g. CD
b) Press the Cursor buttons ( ,
, , ) to move the
highlighted bar to "Clear", then press the ENTER button.
All the input programs will be cleared.
c) Press the
PLAY button to resume normal playback.
Note:
• If the title or chapter numbers you entered is not
permitted by the DVD, after you press the ENTER button,
it will restore to [- -]. You should re-enter correct numbers.
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD
player repeats the current memory playback.
• If you press the MEMORY button while the display appears on the TV screen, the display disappears.
• The programmed selections will be cleared when you open the disc tray or turn off the DVD player.
Playing DivX® Video or Picture files
This unit can play DivX® and picture files recorded on CD-R/CD-RW discs, USB flash drive and SD card.
To play video files on this product you must first convert them to DivX format using the DivX Plus
Player on your PC or MAC. This application can be downloaded at www.divx.com. Please do so,
and then install on your PC or MAC.
Playing DivX® Video or Picture Files
If playing DivX video or picture files, see note below.
1. P ress the OPEN knob to open the disc door.
2. P lace a DivX® / picture file disc onto the tray with label side up.
3. C lose the disc door.
4. A selection menu will appear on the screen.
ENTER
5. P ress or
button to select the
picture or
video icon, and then
press ENTER.
If picture mode is selected, use below to nevigate the menu:
/ : selects a file
/ : page up or down
RETURN : returns to previous menu
ENTER : plays your selected file
Note:
• F or playing files on USB flash drive or SD card, you should plug in the USB flash drive or SD card when
the unit is in STANDBY mode. then follow step 5.
• You can press the button to interrupt playback, and press the
PLAY button to resume playback.
• Y ou also can use the GOTO button or use the numbered buttons to enter a photo number and quickly
select any image.
• During picture playback, press ANGLE button repeatedly to rotate the picture.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified
device that plays DivX video. Visit www.divx.com for more information and software tools to convert
your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX
Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the
device setup menu. Go to vod.divx.com with this code to complete the registration process and learn
more about DivX VOD.
DivX Certifed® to play DivX® video, including premium content.
Customizing the Function Settings
Language Setup
1. Press the SETUP button on the remote control or MENU button on the
unit in stop mode (when disc is not playing).
2. Press the button to select Language Menu.
Language
3. Press the / button to select the option, then press the
button.
Player Menu
Subtitle
4. Press the /
button to select your preferred language, then press
Audio
the ENTER button to confirm.
Disc Menu
5. Repeat steps 3 and 4 to adjust other options.
6. Press the SETUP or RETURN button to exit the menu.
E - 8
Note:
• Some DVDs may not play in the audio language you selected. A prior language may be programmed
on the disc.
• Some DVDs may be set to display subtitles in a language other than the one you selected. A prior
subtitle language may be programmed on the disc.
• Some DVDs allow you to change subtitle selections using the disc menu only. If this is the case,
press the MENU button and choose the appropriate subtitle language from the selection on the disc
menu.
• Some DVDs may not include your pre-selected language. In this case, the DVD player automatically
displays disc menus consistent with the disc's initial language setting.
Video Setup
1. Press the SETUP button on the remote control or MENU button on the
unit in stop mode (when disc is not playing).
Video
2. Press the / button to select Video Menu.
TV Display
3. Press the / button to select the option, then press the
button.
HDMI Res.
button to adjust the setting, then press the ENTER
JPEG Interval
4. Press the /
button to confirm.
5. Repeat steps 3 and 4 to adjust other options.
6. Press the SETUP or RETURN button to exit the menu.
TV Display
Depending on the format of the DVD disc, you can choose the picture format (aspect ratio) best suited
the format of your TV screen.
4 : 3PS
C u t o f f w h e n a
• When wide-screen video is played, this mode clips the right and left sides of the
wide-screen video
image is played.
image so that it can be viewed on a conventional screen.
• Some wide-screen DVDs that do not permit Pan Scan mode playback are
automatically played in letterbox mode (black bands that appear at the top and
bottom of the screen).
4 : 3LB
• When wide-screen video is played in this mode on a conventional screen, black
bands appear at the top and bottom of the screen.
4 : 3PS
16 : 9
• This is the correct mode for playing wide-screen videos on the unit screen or
other external wide-screens.
Note:
• The displayable picture size is preset on the DVD. Therefore the playback picture
4 : 3LB
of some DVDs may not conform to the picture size selected.
• When you play DVDs recorded in the 4:3 aspect ratio, the playback picture will
always appear in the 4:3 aspect ratio regardless of the TV display setting.
• Select 16:9 to conform the LCD screen on the unit. Always be sure that your TV
display conforms to the actual TV in use if you connect the unit to a TV.
16 : 9
HDMI Res. (Resolution)
You can set the HDMI Res. (Resolution) to be Auto, 480p, 720p, 1080i or 1080p, according to the connected
TV.
Note:
• Select the HDMI resolution according to the performance of the connected TV.
• If the Video out is not set to HDMI, you cannot select the HDMI Res.
JPEG Interval
To set the JPEG Interval for slide show playback. Select Off to disable the slide show feature.
Off: Plays back one file at a time.
5 seconds Plays back images in the form of a slide show at 5 seconds interval.
10 seconds Plays back images in the form of a slide show at 10 seconds interval.
15 seconds Plays back images in the form of a slide show at 15 seconds interval.
System Setup
1. Press the SETUP button on the remote control or MENU button on the
unit in stop mode (when disc is not playing).
2. Press the / button to select TV System Menu.
TV System
3. Press the / button to select the option, then press the
button.
Default
button to adjust the settings, then press the ENTER
View DivX(R) VOD
4. Press the /
Screen Saver
button to confirm.
5. Repeat steps 3 and 4 to adjust other options.
6. Press the SETUP or RETURN button to exit the menu.
Default
It takes 3-5 seconds to reset the DVD settings to the factory default.
View DivX(R) VOD
DivX® Registration
DivX® registration code allows you to rent and purchase movies over the internet using the DivX® VOD
service. This menu setting will display the registration code of your unit as follows:
YOU MUST REGISTER YOUR DEVICE TO PLAY
DIVX PROTECTED VIDEOS.
REGISTRATION CODE:
REGISTER AT HTTP://VOD.DIVX.COM
Registration service at http://vod.divx.com
Follow the instructions and download the movie from your computer onto a CD-R/RW or DVD+R/-R or
DVD+RW/-RW for playback on the unit.
Note:
• This registration code is for DivX® Video-On-Demand only. Do not apply this code for other applications
or websites.
• If you have already registered this product, selecting the View DivX(R) VOD setting will allow you to
deregister (deactivate) the product for DivX playback - we recommend you DO NOT deregister the
product.
Screen Saver
To turn on or off the screen saver (screen protection to prevent image burn).
Note:
When you leave the unit in DVD stop mode for approxiamtely 5 minutes, the screen saver of the unit
automatically appears if you set the Screen Saver to On mode. To turn off the screen saver, press the
PLAY button.
E - 9
Sound System
Dolby Digital
Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can
reproduce from one to 5.1 discrete channels of excellent quality audio.
The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-
channel listening. An additional Dolby Digital decoder is required for reproduction of the discrete multi-
channel soundtracks available on many DVDs.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Maintenance
Cleaning the Disc
A defective or soiled disc inserted into the unit can cause sound to drop out during playback.
Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface.
• Do NOT expose the disc to direct sunlight or excessive heat.
• Clean the disc before playback. Wipe the disc from the center outward with a
cleaning cloth.
• NEVER use solvents such as benzine or alcohol to clean the disc.
• Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause
malfunctions.
Cleaning the Unit
• Be sure to turn the unit off and disconnect the AC power adapter before cleaning the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that
has been dipped in a weak soap-and-water solution and wrung out thoroughly, then wipe with a dry
cloth.
• Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed air to
remove dust.
Important Note
• Before transporting the unit, remove the disc from the disc compartment.
Troubleshooting Guide
Symptom
Cause (and remedy)
No power.
• Ensure the AC power adapter is connected.
• The unit is not turned on.
Will not play a
• The file may not be DivX format - please ensure you've used the DivX Plus Player on
video file.
your PC or Mac to successfully convert the file to DivX format.
The remote
• Make sure the infrared remote sensor is not blocked.
control does
• Make sure the plastic sheet has been removed from the remote control.
not function.
• Point the remote directly at the infrared remote sensor on the unit.
• Replace the battery in the remote control with a new one.
No sound or
• The volume control is located on the side of the unit – please try adjusting this.
only a very
• The system is in pause mode. Press the
PLAY button on the remote control or
low-level
button on the unit to return to normal play mode.
sound is heard.
• The unit is in fast-forward or fast-reverse mode. Press the
PLAY button on the
remote control or
button on the unit to return to normal play mode.
• Make sure the AUDIO/VIDEO output connections are correct.
• The DTS DVD cannot be decoded to have speaker output.
• The unit is too hot; shut off the unit for 30 minutes to cool it down.
No picture.
• The region number of the disc doesn't match the region
number of this unit.
The picture is
• Clean the disc.
not clear.
• The disc is scratched.
• Adjust the LCD's brightness and contrast using the VIDEO MODE button on the
remote control.
Severe hum or
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with
noise is heard.
alcohol.
• Clean the disc.
The disc does
• There is no disc inside ("No Disc" appears on the screen).
not play.
• Insert the disc correctly with the playback side facing down.
• Clean the disc.
• A non-NTSC disc has been inserted. The unit and disc region number are
incompatible.
• Condensation may have formed inside the unit due to a sudden change in
temperature. Wait about an hour for it to clear and try again.
No sound is
• Check the connection between this unit and the HDMI IN jack of other equipment.
input from the
• See if your TV supports this 480p/720p/1080i/1080p DVD system.
HDMI IN.
• Make sure your TV supports HDCP (High Bandwidth Digital Content Protection).
Specifications and external appearance are subject to change without notice.
Need More Help?
Please visit online help at http://www.RCAav.com
Printed in China
811-931091W042
Advertisement
