Cluster Configurations - HP 117755-003 - ProSignia - 740 Implementation Manual

To use Microsoft Windows 2000 Server, configuration must meet the requirements described in Table
7.
Table 7. Microsoft Windows 2000 Server configuration requirements
Feature
Processor (support for up to 4
processors)
RAM
Monitor
Disk space
To use Microsoft Windows 2000 Advanced Server, configuration must meet the requirements
described in Table 8.
Table 8. Microsoft Windows 2000 Advanced Server configuration requirements
Feature
Processor (support for up to 8
processors)
RAM
Monitor
Disk space
NOTE: Available disk space refers to free disk space on the partition to contain the system files. Additional
space is required to copy the Windows 2000 CD contents to the hard disk during installation and for a
network installation

Cluster configurations

The following cluster solutions are supported for use with Windows 2000 Advanced Server Service
Pack 4:
• HP ProLiant DL380 G3 Packaged Cluster
• HP ProLiant DL380 G2 Packaged Cluster
• HP ProLiant Cluster HA/F100 & HA/F200 for MSA1000
• HP ProLiant Cluster HA/F500 for EVA5000 & EVA3000
• HP ProLiant Cluster HA/F500 for MA8000/EMA12000/EMA16000
• HP ProLiant Cluster HA/F100 & HA/F200 for RA4100
• HP ProLiant CL380 Packaged Cluster
• HP ProLiant CL1850 Packaged Cluster
Before installing the HP ProLiant Cluster solution, it is very important to refer to the HP Cluster
Configuration Support website for details on components that make up a valid cluster configuration.
Minimum configuration
133-MHz Pentium compatible
128 MB
VGA
2 GB with minimum of 1 GB
available
Minimum configuration
133-MHz Pentium compatible
128 MB
VGA
2 GB with minimum of 1 GB
available
Recommended configuration
Pentium II or better
233 MHz or greater
256 MB to 4 GB
SVGA
4 GB available space
Recommended configuration
Pentium II or better
233 MHz or greater
256 MB to 8 GB
VGA
4 GB available space
17