Compaq 112726-001 - ProLiant - 6500 Integration Notes page 21

HotfixIdentifier=258E5776
MountCommand=
DismountCommand=
[Volume.PL7000-2.SYS]
Shared=False
Mounted=True
HotfixIdentifier=258E5AE8
MountCommand=
DismountCommand=
[Server.PL7000-1]
Volume=VOL1
Volume=SYS
PrimaryLicense=60022796
RecoveryCommand=REC1.NCF
FailoverCommand=FAIL1.NCF
CostandbyCommand=CO1.NCF
DiskLinkSector=1
SecondaryLicense=20614660
0096-0699-A
This value is derived from the partition time stamp NetWare creates. It
is used to recognize volumes for NHAS.
By specifying a command or an executable script, when a server
mounts this particular volume, it processes the commands listed here.
By specifying a command or an executable script, when a server
dismounts this particular volume, it processes the commands listed
here.
This subsection details the information for this particular server,
PL7000-2, in respect to the SYS: volume.
This value should stay false.
Setting the value to false will disable NHAS from automatically
mounting this volume.
This value derive from the partition time stamp NetWare creates and is
used to recognize volumes for NHAS.
By specifying a command or an executable script, when a server
mounts this particular volume, it processes the commands inputted
here.
By specifying a command or an executable script, when a server
dismounts this particular volume, it processes the commands inputted
here.
This subsection details the information for this particular server,
PL7000-1.
These Volume settings identify what should remain exclusive to this
server.
These Volume settings identify what should remain exclusive to this
server.
This License Number is used to as the main Server License for this
node during normal operating conditions.
By specifying a command or an executable script, when a server
enters into the RECOVERY STATE, i.e. has failed, it processes the
commands inputted here. This specified command should call a file
that contains all commands necessary for a successful IP failover.
By specifying a command or an executable script, when a server
enters into the FAILOVER STATE, i.e. is taking over for the other
failed server, it processes the commands inputted here. This specified
command should call a file that contains all commands necessary for a
successful IP failover.
By specifying a command or an executable script, when a server
enters into the COSTANDBY STATE, i.e. Normal condition, it
processes the commands inputted here. This specified command
should call a file that contains all commands necessary for a
successful IP failover.
This specifies the segment of the disk used for quorum arbitration by
the Disk Link.
This License Number is used to append the other Server's License
should a failover happen.