Chipset - Asus P3-P5G31 User Manual

5.4.4

Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to
North Bridge Configuration
South Bridge Configuration
North Bridge Configuration
North Bridge chipset Configuration
Memory Remap Feature
Configure DRAM Timing by SPD
Initiate Graphic Adapter
Internal Graphics Mode Select
PEG Port Configuration
PEG Force x1
Video Function Configuration
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above
the total physical memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
Allows you to select the amount of system memory used by the Interanal graphics
device. Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
PEG Port Configuration
PEG Force x1 [Disabled]
Allows you to enable or disable the PEG Forec x 1.
[Enabled] [Disabled]
5-24
malfunction.
[Enabled]
[Enabled]
[PEG/PCI]
[Enabled, 8MB]
[Disabled]
Configure North Bridge
features.
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory
Configuration options:
Chapter 5: BIOS setup