Control Reference Guide - Panasonic DMP-BBT01 Owner's Manual

Control reference guide

1
2
INTERNET
3
HOME
4
5
OPTION
R G
6
Indicator LEDs
7 8 9 10 11
1 Standby/on switch* (Í/I) (
Touch to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Disc slot ( 17)
3 Eject the disc*( 17)
4 Remote control signal sensor
One of the two sensors will operate
depending on the installation method of the
main unit.( 10)
Distance: Within approx. 7 m (23 feet)
Angle (Against front of the sensor):
Approx. 20e up and down, 30e left and right
5 SD card slot ( 17)
6 USB port ( 17)
7 Status LED (blue/red)
≥ This will light up in blue when the unit is
turned on.
≥ Blue and red will light up simultaneously
when an error occurs. (
≥ This will flash in blue when this unit
receives incoming call etc. of the video
communication. (
7
8
9
KEYS
10
RETURN
B Y
2
14)
34)
22)
1 Turn the unit on and off
2 Show the Home screen of the VIERA
Connect ( 22)
3 Show HOME menu (
4 Touchpad ( 8)
Used for various operation
Move the highlight, confirm the selection, etc.
5 Show Option menu (
6 Colored buttons
Used for various purposes depending on the
display
7 Show NETFLIX screen (
8 Start up a video communication (
9 Show KEYS screen on the screen (
10 Return to previous screen
1
3
5 6
4
8 Standby/on LED (red/green)
This indicator lights red in standby mode and
lights green when the unit is turned on. It is
also possible to set to turn off when the unit is
in standby mode. (
9 CALL LED (blue)
The LED will light up when this unit receives
incoming call etc. of the video
communication. (
10 ACCESS LED (amber)
This will flash while accessing the SD card or
USB device.
11 INFO LED (red)
This will light up at the time of error, etc.
( 34)
* These switches work just by touching the marks. Be careful
not to touch them unintentionally.
The volume of operation sound can be adjusted by "Unit
Operation Sound". ( 33)
17)
25)
22)
22)
9)
Pull to flip down
the panel.
33, "Standby LED")
22)
VQT3W08 7