Important safety instructions Dynex DX-CVS4 Component Video Selector Contents Important safety instructions..............2 Component video selector parts..............2 Setting up the component video selector..........6 Using the component video selector ............8 Maintaining ....................9 Troubleshooting..................10 Specifications..................11 Legal notices ...................12 One-year limited warranty..............13 Important safety instructions •...
Page 3
Component video selector parts Package contents • Component video selector • AC power adapter • Remote control • AAA batteries (2) • User Guide Front LEDs for SELECT/LEARN connected devices button Component Description LEDs for connected devices The LED for a connected device lights when the device is selected.
Page 4
Component video selector parts Back DC 9V Digital Digital Digital Digital Digital Jacks Description Connect a TV to these jacks. For more information, see “Connecting a TV” on page 7. IN1 through IN4 Connect component video devices to these jacks. For more information, see “Connecting component video devices”...
Setting up the component video selector Setting up the component video selector Installing remote control batteries To install remote control batteries: 1 Remove the battery compartment cover on the back of the remote control. 2 Insert two AAA batteries (included) into the battery compartment. Make sure that the + and –...
Setting up the component video selector 2 Connect a digital coaxial audio cable to the Digital jack below the video IN jacks on the back of the component video selector, then connect the other end of the cable to the digital coaxial audio out jack on the component video device. Connect an analog audio cable to the L and R audio jacks below the video IN jacks on the back of the component video selector, then connect the other end of the cable to the analog audio out jacks on the component video device.
Using the component video selector 2 Connect a digital coaxial audio cable to the Digital jack below the video OUT jacks on the back of the component video selector, then connect the other end of the cable to the digital coaxial in jack on an A/V receiver or amplifier. Connect an analog audio cable to the L and R audio jacks below the video OUT jacks on the back of the component video selector, then connect the other end of the cable to the analog audio in jacks on an A/V receiver, amplifier, or TV.
Maintaining Programming the component video selector You can program the component video selector to switch to the correct input when the connected device is powered on with the remote control that came with that device (or a universal remote control that has been programmed to operate the device). To program the component video selector: 1 Make sure that you have connected the component video devices and that you have connected the AC adapter and plugged it into a power outlet.
Troubleshooting Troubleshooting Problem Solution No picture • Make sure the component video selector is set to the correct input for the device you want to use. • Make sure that the TV is set to the correct input for the jacks the selector is connected to.
Legal notices Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
If service of products and parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Dynex Product during the Warranty Period.