VTech VT5871/5808 - V-Tech 5.8 GHz Expandable Cordless System Quick Start Manual

Installation of Battery in Handset
1. Remove the battery cover and place the
battery in the compartment with the metal
contacts aligning, as shown in the diagram.
2. Replace the cover by sliding it upwards.
Setup
1. Plug the power adapter into an electrical
outlet, and the connector into the bottom
of the base unit.
2. Place the handset in the charger, and allow
it to charge for a minimum of 12 hours.
Making Calls
From the handset
• Press /FLASH (on) or to use the
handset speakerphone feature.
• Dial the phone number.
-OR-
• Press /CLEAR (off) or place the
handset back in its base to end your call.
• Press OFF to end your call or place the
handset in its base to end your call.
From the base unit:
• With the base unit idle (off), press MENU.
•
With the call log highlighted press SELECT.
• and
Use the to scroll to the desired
number.
•
Press .
•
Press to end your call.
Answering Calls
From the Handset
• Press /FLASH (on) , or any dialing
keys.
•
Press /CLEAR (off) or place the
handset back in its base to end your call.
-OR-
Place the handset in its base to end your call.
From the Base
•
Press .
•
Press to end your call.
1
Handset Main Menu
Enter the handset main menu options by pressing MENU/SEL. Use the
NavKeys to scroll to Phonebook, Call Log, Messages, Intercom, Settings,
Sounds, Pictures or Animations.
Base Main Menu
With the base unit in idle (off) mode, press the
MENU key to access the CALL LOG ,BASE
SETTINGS, ANSWERING SYSTEM and
REGISTER HANDSET options.
Caller ID/ Call Waiting ID
On the handset
To access the call log, press the CALL LOG softkey.
- OR -
Press MENU/SEL, then the or NavKeys to
scroll to call log menu. Press MENU/SEL.
Use and NavKeys to scroll and view the
CID records in the call log. You can listen to the
message while reviewing the call log. While
reviewing the call log and the caller has left a
message, the screen will display:
•
Press the NavKey to play the message.
•
Press the STOP softkey to stop the message.
If you wish to dial the number from this entry in
the call log, press the and NavKeys to make
/FLASH (on)
a selection, then press or
to dial the number.
Dialing Tip
With the desired CID displayed, press # or
MENU/SEL on the handset to scroll through the
various dialing options. The possible options to
choose from will be either 7, 10, or 11 digits. For
example, if the original number in caller ID
memory was 800-595-9511, then the display
options will be:
On the base
With the base unit in idle (off) mode, Press
MENU, then use the or NavKeys to scroll
to call log menu.
• Press SELECT. Use and NavKeys to
scroll and view the CID records in the call log.
•
To dial a number while reviewing the call log,
press the and NavKeys to make your
selection, then press to dial the number.
2
and