Outgoing Announcements - AT&T ATT E2525 - E2525 2.4 GHz DSS Expandable Cordless Phone User Manual

ATT-2525CIB-d2.qxd 12/30/2003
12
Elapsed
Press to stop
recording time
recording
(seconds)
1
MENU
"Change
announcement"
2
(Play/Stop)
(Plays announcement
previously recorded)
Or
2
RECORD
"Now recording..."
3
Speak into microphone
Microphone
4
(Play/Stop)
(Announcement is
played back)
6:29 PM Page 26
Answering System Operation

Outgoing announcements

Outgoing announcements are the messages callers hear
when calls are answered by the answering system.
The phone is pre-programmed with an announcement
that answers calls with "Hello. Please leave a message
after the tone." You can use this announcement, or
replace it with a recording of your own voice.
To record your outgoing announcement
Press until you hear "Change announcement."
MENU
Then press and begin speaking after you hear
RECORD
"Now recording." Speak facing the telephone base from
about 9 inches away.
Elapsed time (in seconds) will be shown in the message
window as you record. You can record an announce-
ment up to 90 seconds long. Announcements less than 3
seconds long will not be recorded.
To delete your outgoing announcement
Press until you hear "Change announcement,"
MENU
then press to begin playback. Press
PLAY/STOP
during playback to delete your announcement.
When your announcement is deleted, calls will be
answered with the pre-programmed announcement
described above.
26
DELETE