Dell J740 Owner's Manual page 18

To load other paper types, follow these guidelines.
Load up to:
150 sheets of plain paper
10 envelopes
25 sheets of labels
50 sheets of card stock
10 greeting cards, index cards,
postcards, or photo cards
50 sheets of coated, photo, or
glossy paper
10 transparencies
100 sheets of custom size
paper
10 iron-on transfers
20 sheets of banner paper
8
Us i ng the pri nte r
Make sure:
The paper is designed for use with inkjet printers.
• The envelopes are loaded vertically against the right side of the
paper support.
• The stamp location is in the upper left corner.
• The envelopes are designed for use with inkjet printers.
• You squeeze and slide the paper guide to the left edge of the
envelope.
The labels are designed for use with inkjet printers.
• The card stock is designed for use with inkjet printers.
• The thickness does not exceed 0.025 inches.
The cards are loaded vertically against the right side of the paper
support.
The glossy or coated side faces you.
• The transparencies are designed for use with inkjet printers.
• The rough side faces you.
Your paper size fits within these dimensions:
Width
– 76 to 216 mm
– 3.0 to 8.5 in.
• You follow the loading instructions on the iron-on packaging.
• The blank side faces you.
The banner paper is designed for use with inkjet printers.
Length
– 127 to 432 mm
– 5.0 to 17.0 in.