Advertisement
Tabletop installation
For wall installation, see pages 7-8 of user's manual.
Tabletop installation
If you subscribe to high-speed Internet service (digital subscriber line - DSL)
through your telephone line, you must install a DSL filter (not included)
between the telephone base and the telephone wall jack. The filter prevents
noise and caller ID problems caused by DSL interference. Please contact your
DSL service provider for more information about DSL filters.
Follow instructions below to install your telephone to tabletop position.
1.
Check the mounting bracket.
The telephone arrived with the mounting bracket positioned for tabletop use.
Make sure it is secure by pressing the two feet.
2.
Connect one end of the long telephone line cord to the jack labeled TEL
on the back of the telephone.
3.
Connect the other end of the line cord to a wall jack.
TEL
DATA
Telephone
line cord
3
Telephone
wall jack
DSL filter (not
included)
Advertisement
