Table of Contents
Advertisement
9207 29402 CD boom box MUK 2
Power supply
Battery operation
1 Remove the battery compartment door.
2 Insert 8 UM-1 D size batteries into the battery compartment with
battery polarity positioned as indicated.
• We recommend use of alkaline batteries.
3 Close the battery compartment door.
Mains operation
Plug the mains power cord into the AC socket and then into any normal
household mains outlet.
Radio operation
Set
switch (2) to the radio position.
FUNCTION
FM stereo band
Select FM ST. mode with the
to select the desired station. The FM stereo indicator will light up to show
a FM stereo broadcast is being received. Fully extend the FM antenna and
adjust its direction for best FM reception.
Medium wave band
Select MW mode with the
BAND SELECTOR
select the desired station. For medium wave reception the signal is
recieved by a built-in aerial which is directional. Therefore, the set should
be positioned for the best signal strength.
10/6/05
11:26 am
Page 3
switch. Turn the
BAND SELECTOR
TUNING KNOB
switch. Turn the
TUNING KNOB
Cassette operation
Playing a cassette
Tighten any slack tape in the cassette before use, using either a pencil or
pen by simply inserting into the centre of the spool and rotating.
1 Press
to open the cassette door. Insert the cassette into the
STOP/EJECT
compartment with the open end facing upwards and the full reel on the
right hand side, push the cassette well down and close the door, be
sure not to touch the tape surface.
2 Set the
switch to the cassette (off) position and press
FUNCTION
.
CASSETTE PLAY
3 To stop playback, press
again.
STOP/EJECT
• Press
to pause. Press
PAUSE
Rewind
To rewind the tape press
REWIND
stay down and the tape will completely rewind. Press
time to stop rewinding.
Fast forward
To fast forward the tape press
button will stay down and the tape will fast forward until the end of the
tape. Press
at any time to stop fast forwarding.
STOP/EJECT
to
Auto-stop
When the tape reaches the end during playback or recording, the built-in
auto-stop system will release the depressed keys. If recording from the
built-in radio or CD player, only the cassette is brought to a stop and the
radio or CD will continue to play.
• There is no auto-stop on cassette fast forward and rewind.
Recording
1 Install a cassette tape.
2 Set
(2) to the radio position. After selecting the desired
FUNCTION SWITCH
band, tune using the tuning knob (11) to desired radio station. Push
down
button (9) and
RECORD
3 After recording the broadcast, press
to the cassette (off) and rewind in order to listen to the
FUNCTION SWITCH
recorded broadcast.
once. To release the cassette, press
STOP/EJECT
again to resume playing.
PAUSE
when the tape is stopped, the button will
STOP/EJECT
when the tape is stopped, the
FAST FORWARD
(8) simultaneously.
PLAY
(5) lightly, and then set
STOP/EJECT
at any
3
Advertisement
Table of Contents
