Advertisement
Styling tips
Having shampooed your hair, ensure
that it is rinsed properly as shampoo that is
left in the hair will leave it looking dull.
To maximise shine, rinse your hair in
cool water thoroughly.
Comb your hair through with a wide
toothed comb to remove tangles before
styling.
Dry your hair thoroughly using a Morphy
Richards Hairdryer. By drying your hair
thoroughly before using the straightener you
will avoid creating frizz.
Styling
Choose the heat setting relevant for
your hair type. Divide your hair into styling
sections, brushing each section through
thoroughly.
Clamp a section of the hair between the
straightening plates as close to the roots as
possible, gently and slowly pull the
straightener down your hair shaft to the end.
If you need to straighten a section further,
allow to cool and then smooth again.
anodised straightening plates have been
designed to stop your hair from sticking to
the plates.
To change the
styling plates
Your styler has 3 interchangeable styling
plates. To change the plates press the
release button and unclip the fitted plates
and slide the plates from the heater unit.
To refit plates simply slide onto the unit
and click into place.
Always unplug the unit and allow to cool
before removing or fitting new plates.
Crimping &
Box crimping plates
Choose the heat setting that most suits
your hair.
Clamp a section of the hair as close to
the root as possible and slowly move the
crimper down the length of the hair. Repeat
on all sections of the hair.
3
(model 22014 only)
Advertisement
