Morphy Richards 47094 FILTER COFFEE MAKER Instructions Manual

47076 Rev3b:x 13/11/2009 10:43 Page 1
B
Coffee quality
indicator
B
• To help you to decide if your
coffee is likely to be of a good
quality during keep warm
mode, bars on the outside of
the clock face indicate how
long ago the coffee was
brewed.
Locating the filter
1
To remove the filter holder, lift
by using the two handles either
side. To clean, see 'Cleaning
and Maintenance' section on
page 7 .
2 To refit, place the removable
filter holder into the top of your
coffee maker. Ensure that the
cut out on the filter holder lines
up with the slot at the back of
the product.
3
Then place the permanent
mesh filter inside the filter
holder.
Note: Ensure the filter holder is
correctly located, otherwise the
non-drip valve will not open,
causing the filter to flood.
CLEANING AND
MAINTENANCE
Descaling
• If you live in a hard water area,
we recommend that your coffee
maker is descaled at regular
intervals, e.g. every 2-3 months.
In areas of moderately hard
water, you should descale every
6 months.
• If the water filters through more
slowly than usual, it is a sign
5
UK Helpline 0870 060 2614
that descaling is necessary.
• We recommend you use a
proprietary liquid descaler
which is especially made for
coffee makers and plastic
kettles. Follow the instructions
on the bottle or sachet, and
then operate the coffee maker
with just water 3 times before
making coffee.
• Do not use a kettle descaler
unless the packet specifically
states it is suitable for coffee
makers.
Note: The permanent mesh
filter should not be used during
descaling.
Cleaning care
• Unplug the coffee maker and
allow to cool.
• Do not immerse the coffee
maker in liquid.
• Rinse the water reservoir
occasionally with cold water.
Do not use a cloth as any
residue or lint may be left
behind to clog the coffee
maker.
• Remove the permanent filter,
discard any used coffee and
wash. Extended soaking helps
to remove coffee stains from
the mesh.
• Wash the glass jug, jug lid, and
filter holder in warm soapy
water. Rinse and dry all parts
thoroughly. Refit the filter and
filter holder.
• Wipe all external surfaces,
including the warming plate,
with a damp cloth and dry
thoroughly.
• Care must be taken to ensure
that the non-drip valve situated
on the bottom of the filter
holder is not damaged during
cleaning.
• Never use harsh or abrasive
cleaners.
• NO parts are suitable for
cleaning in a dishwasher.
Replacement Parts 0870 157 6645
Helpline
If you have any difficulty with
your appliance, do not hesitate
to call. We are more likely to be
able to help than the store from
where you bought it.
Please have the following
information ready to enable our
staff to deal with your enquiry
quickly:
• Name of the product.
• Model number as shown on the
underside of the appliance.
• Serial number as shown on
underside of the appliance.
UK Helpline 0844 871 0946
Replacement Parts 0844 873 0712
Ireland Helpline 1800 409 119
WEBSITE
You may also contact us
through our website, or visit the
site to browse and purchase
appliances, spare parts and
accessories from the extensive
Morphy Richards range.
Ireland Helpline 1800 409119
1