Download Print this page

Before First Use; Operating The Appliance; Filter Removal - Morphy Richards 43733 SS JUG KETTLE Instructions Manual

Advertisement

43733 rev 2:x 18/12/2009 16:15 Page 6
FEATURES
⁄ Lid with finger pad
¤ Spout filter
‹ Lid release pull
› Water level indicator x 2 with
illuminating light
fi 360° connector
fl Concealed element
‡ On/off switch
· Cordless base unit
‚ Cord storage

BEFORE FIRST USE

Before using the appliance for the
first time, fill with water, boil, pour
away the boiled water, and refill.
OPERATING THE
APPLIANCE
1
Wherever possible, fill through the
spout, as this helps to free the
filter from limescale
build-up.
The integrated water level
indicators allow you to easily see
the amount of water in the kettle.
Always ensure that the appliance
is filled till the water is visible
through the level indicator.
Boil only as much water as you
need as this saves electricity.
2
Place the appliance on the base
unit, ensuring the appliance
locates on to the 360° connector.
The 360° connector allows the
appliance to be located at any
position - ideal for left and right
handed users and convenient
positioning on the worktop.
UK Helpline 0844 871 0954
4
3
Plug in and switch on at the wall
socket.
4
Switch the appliance on. The
water level indicator will light up.
5
When the water boils, the
appliance will switch off
automatically.
Depending on the model variant
you have purchased, the kettle
light will go off.
If you are using the appliance for
the first time, pour away the boiled
water and refill.
6
Lift the appliance from the base
unit by the handle, ensuring you
hold the appliance level.
To re-boil, switch to ON again. If
the appliance has just switched
off, wait a minute or so before
switching it back on again.
If you do not put in enough water,
or switch on the appliance when it
is empty, the safety cut-out will
switch off the power automatically.
If this happens, refill and wait a
few minutes for the element to
cool, then use as normal.

Filter removal

1
Open the lid.
2
Lift the filter upwards from it's
location using the tab provided.
3
To refit the filter, slot it into the side
wall guides and press down firmly.
Ensure the filter is correctly
located into the central guide.
WARNING: Make sure that the
filter is put in correctly,
otherwise the lid will not close.
Replacement Parts 0844 873 0720
Ireland Helpline 1800 409 119

Advertisement

loading

This manual is also suitable for:

43734 charcoalss jug kettle43733Brushed steel jug kettle