Clip Speaker/Main Unit To Stand; Connect Speakers To Player - Morphy Richards 29110 CD MICRO SYSTEM Manual

3
you want to set up your system?
The System is designed to either stand
on a shelf or be attached to a wall.
Why not make things easy, by fi rst
assembling it on a table top.
When you are confi dent using the
System you could use the wall
mounting templates provided to fi x it
to a wall in your home.
b
clip the main
player unit to
its stand
d
connect the speakers to the player
1 The speaker which you stand on the right of the
player should be connected to the red and black
connectors marked R.
2 Connect the red wire to the red terminal (the small
hole under the red plastic tab) and the black wire to
the black terminal.
3 To connect the wires, just push down on the red/black
plastic tab and insert the wire in the hole below it.
When you release the tab, it will be gripped tight.
4 Repeat the above with the left hand speaker.
When you have fi nished there should be one wire
going into each terminal.
mr_Hi-Fi guide TO PRINT.indd 20-21 mr_Hi-Fi guide TO PRINT.indd 4-5
TS IB-778-PM3Ui-001.indd 8-9 TS IB-778-PM3Ui-001.indd 8-9
a
clip the speakers
to their stands
c
The thin black wire at the
back of the player is the
aerial, which will improve
the reception when you
are using the FM radio,
explained later.
Place the speakers as far apart as
possible for the best sound quality.
20
4/11/05 10:28:41 am 4/11/05 10:28:10 am
11/12/2005 16:27:07 11/12/2005 16:27:07