Table of Contents
Advertisement
Flat Tire Monitor
88
System limitations
The Flat Tire Monitor cannot pro-
vide you with advance warning of
sudden and severe tire damage caused
by external factors and does not detect
the balanced and very gradual pressure
loss that takes place in all four tires
over an extended period of
On the other hand, the following situa-
tions can lead to a delayed detection of
pressure loss and even to the system
not functioning:
> Driving on snow-covered or slippery
roads
> Performance-oriented driving: slip at
the drive wheels, high levels of lateral
acceleration
> When driving with snow chains, false
warnings and undetected pressure
losses may occur.
time.<
Initializing the system
Each time you correct the pres-
sure in a tire, or change a wheel or
tire, reinitialize the system immediately
afterwards. This requires a bit of driv-
ing.<
1. Before driving off, start the engine
but do not start driving
2. Press the button as long as you need
to until the yellow indicator lamp in
the instrument cluster lights up for a
few seconds
3. Drive off.
It takes a few minutes before the Flat
Tire Monitor can detect a flat tire and
issue a warning.
When driving with snow chains,
do not initialize the
Online Edition for Part-No. 01 41 0 157 596 - © 09/03 BMW AG
system.<
Advertisement
Table of Contents
