Seat Height - BMW K 1200 GT Rider's Manual

When the ASC symbol ap-
4
pears, release the ASC button
within three seconds.
62
ASC warning light remains
ON.
The ASC function is deactiv-
ated.
Activating ASC function
z
Press and hold down ASC but-
ton 1.
ASC warning light goes out;
if self-diagnosis has not
completed the ASC warning light
starts flashing.
When the ASC symbol disap-
pears, release the ASC button
within three seconds.
The ASC warning light re-
mains off or continues to
flash.
The ASC function is activated.
Instead of pressing the ASC
button, you have the option of
switching the ignition off and
then on again.
An ASC fault has occurred
if the ASC warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 10 km/h after the ignition was
switched off and then on again.

Seat height

Adjusting seat height
Remove the front seat (
Pull seat-height adjuster 1 to
the limit position.
Push the seat height adjuster
74)
fully forward and up or down,
as applicable.