Check Control - BMW 745 2002 Owner's Manual

Check Control

Info Display screen contents
Messages and status reports appear in text
form accompanied by an indicator lamp
symbol. The alert is accompanied by a
gong.
Status reports warning of system malfunc-
tions are assigned one of two priority
ratings:
Priority 1:
These status messages and malfunction
reports are signaled by a gong. Simulta-
neous defects will be displayed consecu-
tively. These messages cannot be deleted,
and they remain in the display until the
problem is corrected. Supplementary infor-
mation also appears in the Control Display,
refer to Automatic messages in Control
Display.
Priority 2:
These status messages and malfunction
reports appear in the Info Display for
approx. 20 seconds.
Briefly press the CHECK button on the turn
signal indicator lever (see arrow) to cancel
80
the message in the display (if allowed by
priority rating).
refer to Selecting stored status reports for
viewing in the Control
Check Control symbol and messages
in the Control Display
The status of the monitored system is indi-
cated by the color of the Check Control
symbol
Green
No malfunctions are present in the moni-
tored systems.
Yellow or red
A defect or malfunction has been detected
in the monitored system. Depending upon
how serious the problem is, a supplemen-
tary message may also appear in the
Control Display.
You can access the stored status reports
through the Control Display, refer to the
next column.
page
Automatic messages in Control
Display
These supplementary messages are
intended to assist you in assessing the
severity of malfunctions; they provide you
with the information you need to decide on
the best way to respond.
Online Edition for Part No. 01400156097 – © 10/01 BMW AG
You can select stored status reports
for viewing in the Control Display,
Display.<
.
The symbol also indicates the status
of the Service Interval Display, refer to
25.<