Specifying The Image Quality Mode - Minolta DIMAGE 2330 Instruction Manual

SPECIFYING THE IMAGE QUALITY MODE

This camera has 3 image quality modes; "FINE" (fine), "STD." (standard) and
"ECON." (economy).
The image quality is related to the compression rate of the image. The
compression rate is higher in the order of "FINE"
higher the compression rate is, the lower the image quality is. When you want
high quality images, select "FINE". However, as the compression rate is low, the
number of the images to be recorded in the CF card is less than that in the
"STD." or "ECON." mode. When you want to record images in the card as much
as possible, select "STD." or "ECON.". However, as the compression rate is high,
the image quality is lower than that in the "FINE" mode.
The compression rate, image recording format, image file size and the
recordable number of the image using the CF card of 8 MB in each FINE, STD.
and ECON. are as follows.
The compression rate
The image recording
format
The image file size
The recordable
number of the image
using the CF card of
8 MB
* Refer to the image file size and recordable number as a guide. These vary
according to the scene or subject to be recorded. The numbers in parentheses
are the values when the image size is set to "HALF".
FINE (Fine)
about 1/6
about 910 KB
(about 270 KB)
about 8
(about 28)
- 60 -
"STD." "ECON.". The
STD. (Standard)
about 1/12
Exif2.1-JPEG
(DCF standards)
about 560 KB
(about 170 KB)
about 13
(about 43)
ECON.(Economy)
about 1/25
about 230 KB
(about 80 KB)
about 33
(about 99)