Hookup and Installation
Step 1
Mounting your Power Console (Optional)
The PureAV Power Console can be mounted to a standard AV
equipment rack or inside a cabinet equipped with an equipment rack.
A.
Remove the mounting brackets from the box.
B.
Make sure that the Power Console is unplugged.
C.
Align the bracket with the front of the Power Console for flush
installation in the rack.
D.
Attach the bracket to the side of the Power Console (Fig.
1). You must use a minimum of four screws to mount each
bracket.
E.
Repeat steps C and D for installation of the bracket to the
other side of the Power Console.
F.
Mount the Power Console to the equipment rack.
Note: Screws for mounting the Power Console to the equipment
rack are not provided as they are made specifically for
the particular equipment rack that you own. Contact the
manufacturer of the rack if you do not have the correct
mounting screws.
Fig. 1
6