Defining Fields; Accessing The Switch Through The Cli - Dell PowerConnect M8024 User Manual

Dell ethernet switch user's guide

Hide thumbs Also See for PowerConnect M8024:

Table of Contents

Table 2-4. Check Boxes

Check Box Type

Hyperlink that takes you to a configuration page.

Removes the selected item.

General selection

To enable a configuration item, i.e., adjust sensitivity of log files, select

match criteria for diffserv, select ACL rule parameters.

Defining Fields

User-defined fields can contain 1

Switch Administrator Web page.

All characters may be used except for the following:

The switch can be managed over a direct connection to the console port or through a Telnet connection.

If you are managing a stack, ensure the serial interface cable is attached to the Master switch of the stack.

Using the CLI is similar to entering commands on a Linux system. If access is through a Telnet

connection, ensure the device has an IP address defined and that the workstation used to access the

device is connected to the device prior to using CLI commands.

For information about configuring an initial IP Address, see "Configuration Overview."

159 characters, unless otherwise noted on the Dell OpenManage

Configuring Dell PowerConnect

Show Quick Links

Table of Contents

Powerconnect m6220 Powerconnect m6348