Magnavox MWC20T6 Owner's Manual page 20

TV/VCR SECTION
RECORDING
ABOUT OVERLAP OF PROGRAMS
When programs overlap, a program may not be
recorded.
• The program with an earlier start has priority.
• Once the earliest program finishes, the overlapping pro-
grams will begin recording in sequence.
• When the starting time is the same, the program set on
the highest position in the program list has priority.
• The illustration below demonstrates the sequence of
recordings.
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
9:00AM
TIMER PROGRAM EXTENSION
You can shift the time schedule of an automatic timer
recording after programming or during recording.
1
Press [STANDBY-ON
2
Press [SET-UP].
Use [ K K / L L ] to select "TIMER PROGRAMMING",
then press [ENTER].
3
Press [REC] and use
[K K / L L ] to select the desired
program.
4
Press [REC] repeatedly until your desired
begin/end time appears.
Each press will shift forward the begin/end time
for recording by 10 minutes.
NOTES:
• When the recording is already in progress, each
press will shift forward the end time only.
• If you want to cancel while setting, press [PAUSE F F ]
on the remote control. The recording time returns to
the original time.
• When you shift forward the time schedule during
recording, the recording speed will be automatically
set to the SLP mode.
5
Press [ENTER] to complete the setting. Then
press [SET-UP] to exit the menu.
20
EN
Recording Sequence
10:00AM 11:00AM 12:00PM
*Recording period is SHADED
] to turn on the unit.
y y
– TIMER PROGRAMMING –
CH DATE BEGIN END
P
B 61 7/03 MON 7:30
M
- - -/- - - - - -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
- - -/- - - - - -:- -
TO CORRECT A PROGRAM AFTERWARD
1
Press [STANDBY-ON
2
Repeat steps 1 to 2 of "AUTOMATIC TIMER
RECORDING" on page 19.
3
Press [B B ] (or press [s s ] to go back one step)
until the part you want to correct begins flashing,
then use [
K K
Press [ENTER] to confirm.
4
Press [STANDBY-ON
recording.
TO CANCEL A PROGRAM
1
Press [STANDBY-ON
2
If recording is in progress, press
[STOP/EJECT C A] on the unit.
3
Press [SET-UP].
Use [ K K / L L ] to select "TIMER PROGRAMMING",
then press [ENTER].
4
Use [ / ] to select a program you want to
K K L L
cancel and press [CLEAR].
5
Press [SET-UP] to exit the menu.
P
8:50 SP
M
-:- - - -
-:- - - -
-:- - - -
-:- - - -
-:- - - -
y y ] to turn on the unit.
/ ] to make the changes.
L L
] to set automatic timer
y y
y y ] to turn on the unit.